Commands
Each subcommand has one entry below, and the full dpm trace --help and dpm trace test --help output is at the end of this section.
trace
Inspect a successful transaction by update ID, or a failed submission through its completion data.
dpm trace <update-id> --submitter <url> --read-as <party>
dpm trace --command-id <id> --submitter <url> --act-as <party>
dpm trace --completion-file <file>
Add --visualize to step through the result, --export <file> to save it, and --print-json to print the normalized trace as JSON.
submit
Submit a command and print the update ID. On failure, it prints the rejection, and --export <file> saves it.
dpm trace submit --submitter <url> --act-as <party> \
--template '#package:Module:Template' --arg <field>=<value>
Add --choice <name> and --contract-id <id> to exercise a choice, and --command-id <id> to set the command ID yourself.
prepare
Show what a command would do, without committing it. Takes the same command flags as submit. --export <file> saves the prepared artifact.
open
Reopen an exported trace or prepared artifact, without a ledger. Add --visualize to step through it.
dpm trace open <file>
compare
Compare two updates, a prepared command and an update, or a prepared command and a completion.
dpm trace compare <baseline-update-id> <candidate-update-id> --submitter <url> --read-as <party>
dpm trace compare --prepared <file> --update <update-id> --submitter <url> --read-as <party>
dpm trace compare --prepared <file> --completion-file <file>
test
Run Daml Script tests, print the transaction tree of each one, and exit non-zero when a test fails, as shown in Run tests in CI.
dpm trace test <package-dir>
| Flag | What it does |
|---|---|
--daml <toolchain> | Runs the tests with dpm, daml or damlc. It defaults to dpm. |
-p <pattern>, --test-pattern <pattern> | Runs only the tests that match the pattern. |
--files <path> | Restricts the run to specific source files. It can be repeated. |
--no-trees | Prints only the summary and the failures, which keeps CI logs short. |
--junit <file> | Also writes JUnit XML for the CI system. |
--print-json | Prints the dpm-trace/test-report/v0 JSON report and exits. |
--daml-yaml <file> | Sets the daml.yaml whose sources are searched for failure locations. It can be repeated and defaults to the package's. |
--source-root <path> | Adds a local Daml source root for failure locations. It can be repeated. |
--debug-info <file> | Reads source positions from a daml-debug-info/v1 file. It can be repeated. |
--dar <file> | Checks the failure text against the compiled package with damlc inspect. It can be repeated. With --integration, deploys the first DAR instead of building one. |
--damlc <path> | Sets the dpm, daml or damlc executable that inspects the DAR. It defaults to the --daml value. |
--max-source-locations <n> | Sets the maximum number of source locations per failure. It defaults to 6. |
--keep-artifacts | Keeps the temporary run directory. |
--integration <dir> | Starts a local Canton, runs the integration tests in the directory against it and stops it. |
--canton-jar <file> | Sets the Canton JAR that --integration starts. It defaults to $DPM_TRACE_CANTON_JAR. |
--parties Name@N | Places each party on participant N, for example Alice@1,Bob@2. It can list several parties separated by commas. It defaults to Alice,Bob. |
--lit <path> | Sets the lit executable that --integration runs. It defaults to lit. |
--sequencer-type <type> | Sets the sequencer type of the local Canton. It defaults to bft. |
--canton-timeout <seconds> | Sets how long to wait for the local Canton to be ready. It defaults to 180. |
--verbose | Passes -vv to lit so each test prints its output. |
--init | Creates itests/, unittests/ and a CI workflow in the package instead of running tests. |
--no-unittests | With --init, skips unittests/. |
--no-ci | With --init, skips the CI workflow. |
--itests-dir <dir> | With --init, sets the integration test directory. It defaults to itests. |
--unittests-dir <dir> | With --init, sets the unit test directory. It defaults to unittests. |
The command exits with 0 when every test passes, 1 when a test fails, and 2 when it cannot run, for example, when the toolchain is missing.
install-plugin
Register the binary with DPM so dpm trace works.
dpm-trace install-plugin
Full dpm trace --help output
dpm-trace inspects participant-scoped Canton transactions.
Usage:
dpm trace <update-id> [flags]
dpm trace --command-id <id> [flags]
dpm trace --completion-file <file> [flags]
dpm trace <command> [flags]
Commands:
open Reopen an exported trace or prepared artifact.
compare Compare prepared transactions, updates, or completions.
prepare Prepare a command without committing it.
submit Submit a command and print the resulting update id.
test Run Daml Script tests, or integration tests against a local Canton.
install-plugin Register this binary as a DPM component.
Flags:
--submitter URL Ledger JSON API base URL. Alias of --ledger-url, --participant-url.
--scan-url URL Scan API base URL, e.g. https://.../api/scan.
--read-as PARTY Party to read as. Repeatable. Alias of --party.
--token TOKEN Bearer token for the Ledger JSON API.
--token-file PATH Bearer token file. Alias of --access-token-file.
--completion-file PATH Inspect a captured completion instead of an update.
--daml-yaml PATH daml.yaml for local source diagnostics. Repeatable.
--dar PATH Local DAR, verified with damlc inspect. Repeatable.
--damlc PATH dpm, daml or damlc executable for inspection. Defaults to dpm.
--debug-info PATH daml-debug-info/v1 file for source positions. Repeatable.
--wait SECONDS Retry while the update is not yet visible on this participant.
--visualize Open the interactive visualizer over the trace.
--export PATH Write a portable trace artifact. Alias of --out.
--print-json Print the normalized trace JSON and exit.
--source MODE auto, scan or ledger. Defaults to auto.
--source-root PATH Local Daml source root for diagnostics. Repeatable.
--log-file PATH Operator log to correlate with the completion. Repeatable.
--command-id ID Look up a failed submission by command id.
--begin-exclusive N Offset to search completions from. Defaults to 0.
--completion-limit N Completions to search. Defaults to 100.
--max-source-locations N Maximum diagnostics to resolve. Defaults to 5.
--explain-apis Explain Scan API vs Ledger API.
--config PATH Config JSON. Defaults to .dpm-trace.json in this directory or a parent.
--color MODE auto, always or never. Defaults to auto.
-h, --help Show this help.
Examples:
dpm trace <update-id> --submitter http://localhost:7575 --read-as '<party>'
dpm trace open trace.json --visualize
dpm trace --completion-file completion.json --daml-yaml ./daml.yaml
dpm trace compare --prepared prepared.json --update <update-id>
dpm trace <update-id> --export trace.json
Output is participant-scoped: it is one participant's projection, not a
global Canton transaction. A failed submission has no update id, so those
workflows use completion data instead.
Full dpm trace test --help output
Run Daml Script unit tests, or lit integration tests against a local Canton, and map failures to source.
Usage:
dpm trace test <package-dir> [flags]
Flags:
--daml PATH Toolchain to run: dpm, daml or damlc. Defaults to dpm.
-p, --test-pattern PAT Run only tests matching a pattern.
--files PATH Restrict to specific source files. Repeatable.
--junit PATH Also write JUnit XML for CI.
--print-json Print the dpm-trace/test-report/v0 report and exit.
--no-trees Summary and failures only, for compact CI logs.
--daml-yaml PATH daml.yaml for source diagnostics. Repeatable. Defaults to the package's.
--source-root PATH Local Daml source root for diagnostics. Repeatable.
--debug-info PATH daml-debug-info/v1 file for source positions. Repeatable.
--max-source-locations N Maximum diagnostics per failure. Defaults to 6.
--keep-artifacts Keep the temporary run directory.
--dar PATH Local DAR to verify failures with damlc inspect. Repeatable.
--damlc PATH dpm, daml or damlc executable for inspection. Defaults to --daml.
--integration DIR Run the integration tests in DIR against a local Canton that dpm trace starts and stops.
--canton-jar PATH Canton JAR to start for --integration. Defaults to $DPM_TRACE_CANTON_JAR.
--dar PATH With --integration, deploy the first DAR instead of building.
--parties Name@N,... Parties to allocate and the participant each is placed on, e.g. Alice@1,Bob@2. Defaults to Alice,Bob.
--lit PATH lit executable for --integration. Defaults to lit.
--sequencer-type TYPE Sequencer type of the local Canton. Defaults to bft.
--canton-timeout SECONDS How long to wait for the local Canton to be ready. Defaults to 180.
--verbose Pass -vv to lit for per-test output.
--init Scaffold itests/, unittests/ and a CI workflow in the package instead of running tests.
--no-unittests With --init, skip unittests/.
--no-ci With --init, skip the CI workflow.
--itests-dir DIR With --init, the integration test directory. Defaults to itests.
--unittests-dir DIR With --init, the unit test directory. Defaults to unittests.
--config PATH Config JSON. Defaults to .dpm-trace.json in this directory or a parent.
--color MODE auto, always or never. Defaults to auto.
-h, --help Show this help.